37
Assembly
Scope of delivery
The device is shipped in a carton.
The scope of delivery included:
– The device.
– Tool bag.
– This operating manual.
– Manufacturer’s certificate.
– Operating instructions of engine manufac-
turer (4-stroke devices).
Unpacking
1.
Open the box at the top.
2.
Remove all loose parts from the box.
3.
Cut open the front side of the box.
4.
Fold up the handlebar (see Unfolding the
device).
5.
Check the air pressure of the tyres (see
Technical data).
6.
Press the brake bar towards the handle-
bar to release the brake and push the
device out of the box.
Unfolding the device
2
1
Fig. 14:
1. Pull off the spring cotter (
2
) between the
guide bar and crank of the height adjust-
ment (
1
) starting from.
2. Unfold the guide bar until it engages.
3
4
5
Fig. 15:
3. Pull the stop bolt (
3
) for the lever for the lat-
eral adjustment out of the notch.
4.
Beware:
Do not squeeze the Bowden
cables when swivelling the handlebar.
Swivel the handlebar clockwise to the de-
sired position. Let the stop bolt engage in
one of the three notches of the guide bar.
5. Release the interlock of the steerable front
wheel (
4
) at both front wheels.
6. Flip down the protective bow (
5
).
1
2
Fig. 16:
7. Flip the crank of the height adjustment (
1
)
to the front.
8. Lock the crank of the height adjustment
with the spring cotter (
2
) at the protection
bow.
