36
Longer storage
1.
Observe the safety instructions for hand-
ling the fuel.
2.
Run the fuel tank empty.
3.
Emtyping carburetor: Close the fuel valve
and the tank ventilation, start the engine
and let it run until it stops by itself.
4.
Thoroughly clean the device.
5.
Repair existing paint damage.
6.
Remove the ignition key and store it sep-
arately from the device.
Before longer storage, e.g. in the fall, have an
authorised service centre check the device!
Also observe the information regarding storage
in the operator’s manual of the engine manu-
facturer.
Restarting
If you want to start the device after a longer
storage, carry out the tasks described in
chapter Maintenance.
Spare parts
The reliable and safe operation of the device
also depends on the quality of the spare parts
used. Only use original spare parts and ac-
cessories that were approved by
“AS-Motor Germany”. When foreign parts are
installed, the warranty and guarantee shall be
void for the foreign part and for the device and
for any resulting damage.
Inform your authorised service centre about
the device type and serial number of your
devices when you order spare parts.
Wear parts
Some parts are wear parts. They wear during
use and must be replaced. The warranty does
not cover the following parts:
Blades, cutting blades, cutter bars, blade bolts,
sliding plates, V-belt, chains, Bowden cables,
starter ropes, pressure plates, air filters, spark
plugs, disc springs, lock washers, fuses, discs,
thrust plates, pressure discs, protection skirts,
impact protection, wheels, tires.
Summary of Contents for 021917080011
Page 47: ...47...
