25
Moving the device without drive
Warning
Hot silencer grid.
► Do not touch the silencer grid (
3
) when
you are pushing the device. The grid
gets very hot during operation and you
can get burned.
Notice
When the engine is started while the drive is
unlocked, the hydraulic drive can be des-
troyed.
► Never start the engine when the drive is
unlocked.
To push the mower without engine drive, un-
lock the drive at the rear of the device and re-
lease the parking brake. The mower can only
be braked via the parking brake.
2
1
Fig. 9:
1: = Locked
2: = Unlocked
Switching off and parking
Warning
Risk of injury in case of unauthorised use.
► Always remove the ignition key when
you do not use the device.
1. Move the drive lever slowly to neutral posi-
tion.
2. Turn the accelerator lever to idle speed.
3. Switch off the blade clutch.
4. Move the lever for the cutting height adjust-
ment to transport position.
5. Actuate the parking brake.
6. Turn the ignition key to “ignition off”.
7. Wait until the engine comes to a standstill
before you step away from the device.
8. Remove the ignition key.
9. Close the fuel valve.
10. Close the tank ventilation.
Summary of Contents for 021917080011
Page 47: ...47...
