Speaker System
Installation/Flying Details
FRONT
SIDE
REAR
TOP
BOTTOM
SPL 8H Cabinet Dimensions and Layout
Flying Point
locations
Connector
Part # R1434
Cabinet fitting
Part # R1436
The recessed flying points on the SPL
12 are designed to receive a single stud
spring-loaded track connector. See be-
low.
The SPL 8H has 6m T-nuts pre-installed
on the Top and on the Right Hand Side
when looking from the front. These are
laid out ready to accept 6mm bolts to
mount an Omnimount Series 100 brack-
et/clamp assembly to the cabinet.
Mounting brackets are available from
Omnimount, or can be ordered through
ARX to be delivered with your speaker
system
Check www.omnimount.com for dis-
tributor details for your country
FRONT
SIDE
REAR
TOP
BOTTOM
Omnimount
100 series
mounting
Dimensions
Connectors are available from Penn Fab-
rications worldwide, or can be ordered
through ARX to be delivered with your
speaker system
Check www.penn-fabrication.com for
distributor details for your country
All dimensions
in millimetres
SPL 12 Cabinet Dimensions and Layout
