216
| DHCP Configuration
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
(Instant AP)(config)# ip dhcp <profile-name>
(Instant AP)(DHCP Profile <profile-name>)# ip dhcp server-type <Distributed,L2>
(Instant AP)(DHCP Profile <profile-name>)# server-vlan <vlan-ID>
(Instant AP)(DHCP Profile <profile-name>)# subnet-mask <subnet-mask>
(Instant AP)(DHCP Profile <profile-name>)# default-router <IP-address>
(Instant AP)(DHCP Profile <profile-name>)# client-count <number>
(Instant AP)(DHCP Profile <profile-name>)# dns-server <name>
(Instant AP)(DHCP Profile <profile-name>)# domain-name <domain-name>
(Instant AP)(DHCP Profile <profile-name>)# lease-time <seconds>
(Instant AP)(DHCP Profile <profile-name>)# ip-range <start-IP> <end-IP>
(Instant AP)(DHCP Profile <profile-name>)# reserve {first|last} <count>
(Instant AP)(DHCP Profile <profile-name>)# option <type> <value>
(Instant AP)(DHCP Profile <profile-name>)# end
(Instant AP)# commit apply
To configure a Distributed, L3 DHCP scope:
(Instant AP)(config)# ip dhcp <profile-name>
(Instant AP)(DHCP Profile <profile-name>)# ip dhcp server-type <Distributed,L3>
(Instant AP)(DHCP Profile <profile-name>)# server-vlan <vlan-ID>
(Instant AP)(DHCP Profile <profile-name>)# client-count <number>
(Instant AP)(DHCP Profile <profile-name>)# dns-server <name>
(Instant AP)(DHCP Profile <profile-name>)# domain-name <domain-name>
(Instant AP)(DHCP Profile <profile-name>)# lease-time <seconds>
(Instant AP)(DHCP Profile <profile-name>)# dynamic-dns [key <TSIG KEY>]
(Instant AP)(DHCP Profile <profile-name>)# ip-range <start-IP> <end-IP>
(Instant AP)(DHCP Profile <profile-name>)# reserve {first|last} <count>
(Instant AP)(DHCP Profile <profile-name>)# option <type> <value>
(Instant AP)(DHCP Profile <profile-name>)# end
(Instant AP)# commit apply
Configuring Centralized DHCP Scopes
When a centralized DHCP scope is configured, the following points are to be noted:
l
The VC does not assign an IP address to the client and the DHCP traffic is directly forwarded to the DHCP
server.
l
For Centralized, L2 clients, the VC bridges the DHCP traffic to the controller over the VPN/GRE tunnel. The IP
address is obtained from the DHCP server behind the controller serving the VLAN/GRE of the client. This
DHCP assignment mode also allows you to add the DHCP option 82 to the DHCP traffic forwarded to the
controller.
l
For Centralized, L3 clients, the VC acts as a DHCP relay agent that forwards the DHCP traffic to the DHCP
server located either in the corporate or local network. The Centralized, L3 VLAN IP is used as the source IP.
The IP address is obtained from the DHCP server.
You can configure a centralized DHCP scope through the Instant UI or the CLI.
In the Instant UI
To configure a centralized DHCP scope:
1. Click
More > DHCP Server
. The
DHCP Server
window is displayed.
2. To configure a centralized DHCP scope, click
New
under
Centralized DHCP Scopes
. The
New DHCP
Scope
window is displayed.
3. To configure a centralized profile, select the profile type as
Centralized, L2
or
Centralized, L3
and
configure the following parameters.
