Chapter 3: Basic Switch Commands
36
RESET IP
Syntax
reset ip interface=1
Parameter
interface
Specifies the interface number. This value is
always 1.
Description
This command returns the IP address, subnet mask, and gateway
address to their default values, which are:
❑
IP address: 0.0.0.0
❑
Subnet mask: 0.0.0.0
❑
Default gateway address: 0.0.0.0
To return one of the above parameters to its default value, refer to
Example
The following command returns the switch’s IP address, subnet mask,
and gateway address to their default values:
reset ip interface=1
