AT-S60 Command Line User’s Guide
147
SHOW STP
Syntax
show stp [port=
port
]
Parameter
port
Specifies the port whose STP parameters you want
to view. You can specify more than one port at a
time. (For information on how to enter ports, refer to
Description
This command displays the current values for the following STP
parameters:
❑
STP status
❑
Bridge identifier
❑
Bridge priority
❑
Hello time
❑
Forwarding delay
❑
Maximum age timer
You can also use this command to view the following STP parameter
settings for a switch port:
❑
Path cost
❑
Port priority
❑
Port STP state
Examples
The following command displays the switch’s STP settings:
show stp
The following command displays the STP settings for Ports 1 through 4
on the line card in Slot 5:
show stp port=5.1-4
