Aruba 800-E
23
Installation Guide
Configuring the 800-E From the WebUI
Chapter 4
Configuring Ports
To configure ports on your Aruba 800-E:
1.
Navigate to the
Configuration > Switch
page.
2.
Select the
Port
tab.
3.
Select each port to be configured.
4.
In the
Configure Selected Ports
section, make sure
Enable Port
and
Enable
MUX
are selected.
5.
Enter the VLAN ID associated with this port.
6.
Configure any other port features such as PoE, spanning tree, etc.
N
OTE
:
The Port Mode for the 800-E is restricted to
Access
.
F
IGURE
4-3
Configuring Multiplexer Ports
Summary of Contents for 800-E
Page 1: ...Aruba 800 E Access Multiplexer Installation Guide...
Page 12: ...System Overview Chapter 1 4 Aruba 800 E 0500191 Installation Guide November 2005...
Page 22: ...Installing the Chassis Chapter 2 14 Aruba 800 E 0500191 Installation Guide November 2005...
Page 40: ...Troubleshooting Chapter 5 32 Aruba 800 E 0500191 Installation Guide November 2005...
