Aruba Networks AirOS v2.3, User Manual

Page: 20 / 254

10 Aruba AirOS Part 0500036-02
v2.3 User Guide January 2005
Network Configuration
Create/Edit a VLAN
1 Navigate to the
Configuration > Switch > VLAN
page on the WebUI.
2 Click
Add
to create a new VLAN. To edit an existing VLAN click
Edit
for this
VLAN. On the next screen (as shown below), enter the VLAN ID, the IP address
and network mask of the VLAN interface. If required, the address of the DHCP
server for that VLAN can also be configured by clicking
Add
.
The VLAN can be assigned to the required ports by selecting the appropriate
boxes in the
Assign this VLAN to Ports
fields. However, the recommended proce-
dure for assigning VLANs to ports is explained in the following section.