4.1.4. Where to find the manual
There is a built-in help file for the MIDI Control Center in its Help menu, as shown below:
It’s a good introduction to the MIDI Control Center, describing each section of the software
window and defining important terms you will need to know while using the MIDI Control
Center, such as ‘Working Project’ and ‘Template’.
The next chapter explains how to use the MIDI Control Center software to configure the
MiniLab MkII settings so they match your system and enhance your workflow.
4.1.5. Using MIDI Control Center
Before launching the MIDI Control Center (hereafter the MCC), make sure your Arturia
MiniLab MkII keyboard is connected to your computer.
The built-in MCC manual has general descriptions of the features that are common to all
Arturia products. To learn how to access the manual, see
Where to find the Manual section
[p.21]
.
This chapter will cover only the MCC features that are unique to MiniLab MkII.
4.1.6. MIDI Control Center features
When the MCC and MiniLab MkII are connected you are able to:
• Drag and drop one of the Templates in the Template Browser to one of the
internal Memory locations
• Use the Store To and Recall From buttons to transfer a Template to / from the
MiniLab MkII
• Edit the Device Settings (i.e., the Global parameters)
• Perform other MCC functions such as file management and Template creation,
among other things.
Arturia - User Manual MiniLab MkII - MIDI Control Center
21
