4.3. Saving Presets
When you've edited a Preset and like the results, you can save it. Here's the workflow:
• Start by clicking the
Save
button.
• Display shows "Preview Slot"
• Underneath the preset name, the message "Click to Save" is shown.
• Press the
Save
button.
Your preset will then be saved.
When the
Save
button is lit, pressing it again will save the Preset immediately. You won't get
an "Are You Sure?", so be sure you've done everything you need to do and that the save will
be to the right Preset number!
If you want to cancel the Save process :
• Click the
Sound Edit
button.
• The Save button will go dark and Display will read "Save Cancelled".
Lastly, note that when powering your MiniFreak back on, the last saved preset will be reloaded.
4.3.1. Updating a Preset
If you only want to save your edits to the same Preset in the same slot, just click Save again
and you're done. The Display will say "Preset Saved" for a moment.
If you want to do more than just update your preset, you have the following optional
operations, in this order:
• Choose a new destination slot for the edited Preset, leaving the current Preset as
it was when it was last saved
• Change the Preset Type
• Rename the Preset
You move to the next operation by clicking the Preset encoder.
Note that you can't go back to a previous operation once you've left it. For example, once you've
selected a new destination slot for the edited Preset and clicked the encoder to change its Type, you
can't go back and choose a different destination slot. At that point, your only option is to cancel the Save
(press the Sound Edit button) and start the process over again.
4.3.2. Saving to a new Preset number
Turn the Preset encoder to choose a destination slot. The Display will show the destination
and the name of the Preset that's there already, which will be overwritten. That Preset will
now be heard when you play the MiniFreak, so you can make sure you're not overwriting
something you want to keep.
Once you've selected your destination slot, you can click Save to complete the operation, or
click the Preset encoder to proceed to the next step.
Arturia - User Manual MiniFreak - Managing Presets
16
Summary of Contents for MiniFreak
Page 1: ...USER MANUAL _MINIFREAK...
