ARTURIA – JUPITER-8V – USER’S MANUAL
89
8
THE BASICS OF SUBTRACTIVE SYNTHESIS
Subtractive synthesis appeared at the end of the 1960’s, giving birth to the first analog
synthesizers: Moog, ARP, EMS, Oberheim, Roland (SH, Juno or Jupiter series), Yamaha
(CS series) and Korg (MS and PS series).
Of all forms of audio synthesis, subtractive is one of the oldest, and to this day, the most
frequently employed by sound designers and musicians alike. This is due to the simplicity
with which complex sounds can be created, over the more difficult types of synthesis,
many of which employ elements of subtractive synthesis as well, such as low-pass
filtering. As a basic overview to subtractive synthesis, one may consider any sound
created, either in real life or on the synthesizer of your choice, as consisting of a number
of sine waves, or harmonics grouped together. In subtractive synthesis, we start with a
harmonically rich sound such as a saw wave, and through filtering, we remove the sine
waves (or harmonics) that we do not want. This as you can imagine is much more
complex than turning a filter control knob!
The Jupiter-8V you own shows some very good examples of the subtractive synthesis
possibilities.
8.1
T
HE MAIN ELEMENTS
8.1.1
The Oscillator or VCO
The oscillator or VCO (Voltage Controlled Oscillator) is the starting module (with the
noise module which is often classed among the oscillators) for the creation of a sound on
an analog system.
It will generate the initial sound signal. We can think of the oscillator like a violin string
that once stroked or plucked, vibrates to create its sound.
Oscillator Section on the Jupiter 8
The main oscillator settings are:
The
pitch
determined by the oscillation frequency. You can set the frequency of the
oscillator with 3 controllers:
•
The “RANGE” parameter allows setting the tuning of the oscillator by octave. Usually,
on four octaves 16', 8', 4', 2'. (The unities are indicated in feet, referring to the sizes
of the pipes of church organs). The Jupiter-8 also has a “LOW” range to set the
oscillator2 to low frequencies.
Summary of Contents for JUPITER-8V 2
Page 1: ...ARTURIA JUPITER 8V USER S MANUAL 1 USER S MANUAL 2 0 ...
Page 24: ...ARTURIA JUPITER 8V USER S MANUAL 24 It s now time to launch Jupiter 8V2 ...
Page 88: ...ARTURIA JUPITER 8V USER S MANUAL 88 Dual Phaser ...
Page 121: ...ARTURIA JUPITER 8V USER S MANUAL 121 Connection from a MIDI track to Jupiter 8V ...
