1.2.5. Synchronization Options
There are four Sync options which are accessed by pressing the Sync button repeatedly.
These determine whether the DrumBrute Impact will be the master or the slave in a multi-
device setup.
Whether it is the master or the slave in a system, the DrumBrute Impact can be set to
transmit and respond to one of four different clock rates (1P, 2P, 24P, or 48P). This choice
may be made very easily from the front panel by holding the Sync button and turning the
Rate/Fine knob.
For a full description of the sync features see the
section.
1.2.6. Step buttons
One main use for the sixteen Step buttons is to select patterns in Pattern mode. But they
serve many other purposes as well.
For example, in Step mode they are used to enable/disable events in a pattern. And when
used with the Shift button they select time division values and toggle certain features on and
off.
In this manual you will learn how to use the Step buttons to
, select a
bank or pattern (see
), to
, to set the
, and much more.
The Step buttons with secondary Shift functions are covered in the appropriate sections of
the manual. Follow this link for
a chart of all the Shift functions [p.67]
.
Arturia - User Manual DrumBrute Impact - Overview
8
Summary of Contents for DRUMBRUTE IMPACT
Page 1: ...USER MANUAL...
