background image

 

READ  THIS  CARE  AND  USE  MANUAL  CAREFULLY  AND  COMPLETELY  BEFORE  USING  YOUR 
GRILL  TO  REDUCE  THE  RISK  OF  FIRE,  BURN  HAZARD  OR  OTHER  INJURY.    KEEP  THIS 
MANUAL FOR FUTURE REFERENCE. 
 

When properly cared for, your ARTISAN™ Grill will give safe, reliable service for many years.  However, 
extreme care must be used since the grill produces intense heat, which can increase accident potential.  
When  using  this  appliance,  basic  safety  practices  must  be  followed,  including  but  not  limited  to  the 
following: 
 

 

Begin by ensuring proper assembly. A qualified technician should perform all other service. 

 

 

All other service should be referred to and performed by a qualified technician. 

 

 

For personal safety, wear proper apparel while barbecuing. 

 

 

Loose fitting garments or sleeves should never be worn while using this appliance. 

 

 

Some synthetic fabrics are highly flammable and should not be worn while cooking. 

 

 

Never let clothing, pot holders or other flammable materials come in contact with or too close to any 
grate,  burner  or  hot  surface  until  it  has  cooled  down  sufficiently.  Fabrics  may  ignite  and  result  in 
personal injury. 

 

 

Use only dry potholders: moist or damp potholders on hot surfaces may cause personal burns from 
steam.  Do  not  use  a  towel  or  bulky  cloth  in  place  of  potholders.  Do  not  let  potholders  touch  hot 
portions of the grill rack. 

 

 

Only  certain  types  of  glass,  heatproof  glass  ceramic,  earthenware,  or  other  glazed  utensils  are 
suitable for grill use. These types of materials may break with sudden temperature changes. Use only 
on low or medium heat settings and according to their manufacturer’s directions. 

 

 

Grease is flammable. Let hot grease cool before attempting to handle it. 

 

 

Avoid  letting  grease  deposits  collect  in  the  bottom  of  the  grill  by  cleaning  the  grease  tray  often.  
Never while grill is on or hot from recent use; pan will not come out. 

 

 

Do  not  use  aluminum  foil  to  line  the  grill  racks,  nor  to  line  the  drip  tray.  This  can  severely  upset 
combustion airflow or trap excessive heat in the control area. The result of this can be melted knobs, 
igniters and increased chance of personal injury. Never grill without the drip pan in place and pushed 
all the way to the back of the grill. Without the drip pan, hot grease can leak downward creating a fire 
or explosion hazard. 

 

 

Children should not be left alone or unattended in an area where the grill is being used. Never allow 
them to sit, stand or play on or around the grill. Do not store items of interest to children around or 
below the grill or in the cart. Never allow children to crawl inside of the cart. 

 

 

Do not heat unopened food containers that may cause the container to build-up pressure and burst. 

 

 

Protect your hand when opening a hot grill lid.  Never lean over an open hot grill. 

 
 
 

Summary of Contents for AAE































Reviews: