artisan 5400-E, User Manual, Page: 3 / 15

Notice: Artisan Controls Corporation assumes no responsibility for customers applications or product design. The information and data contained herein is the sole and
exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written consent of Artisan Controls
Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party misusing this property
Artisan Controls Corporation, 111 Canfield Ave., Bldg B15-18, Randolph, NJ 07869
www.artisancontrols.com
5400-
E Event Controller User’s Manual
Table of Contents
Page 3
V1.05
MAIN SCREEN (cont)
Time and Date -
To update the time and/or date simply touch either the time or
date on the main screen and this window appears:
To change any item (other than the am/pm) simply touch the
item and it is highlighted in green. The window to the right
shows the hours being highlighted. To change the value use the
plus and minus buttons on the right side. To change the am to
pm and vice versa simply touch the item and it toggles back
and forth.
Output Buttons -
Touching any of the output buttons displays the events in its
schedule, this event occurs at 7:00 am, the output is turned
ON, and this happens Monday thru Friday but not on Saturday
or Sunday. More details about events are in the Scheduling
section later in this manual.
Touching and holding an output button for two seconds until it
double chirps manually changes its state from on to off or off
to on.
To exit without changing press the red X in the upper right hand corner. to save the new values press the
[SAVE] button. The system save the new values and return to the main screen.
Buttons for outputs which are turned on are filled with green, otherwise they are black. Outputs whose
schedules are disabled will be black and there will be no name visible in the button . Disabled outputs
cannot be changed by holding their buttons down nor are their schedules available for viewing .
Main Menu Button -
Pressing the [M] button in the upper right hand corner will access the Main Menu screen from which the
output schedules are managed, holidays can be configured, the controller security and input functions can
be configured, and the controller configurations and schedules can be imported and exported.