artisan 5400-E, User Manual, Page: 11 / 15

Notice: Artisan Controls Corporation assumes no responsibility for customers applications or product design. The information and data contained herein is the sole and
exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written consent of Artisan Controls
Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party misusing this property
Artisan Controls Corporation, 111 Canfield Ave., Bldg B15-18, Randolph, NJ 07869
www.artisancontrols.com
5400-
E Event Controller User’s Manual
Table of Contents
Page 11
V1.05
The 5400-E can save and read information from USB flash
drives up to 16Gb in size. Press the [USB] button in the main
menu and this window appears.
NOTE: Do not insert the USB drive until you are in this window.
Once you insert the USB drive the controller indicates that it
has detected it and the [Export] and [Import] buttons are
enabled.
IMPORT / EXPORT
Export:
Press the [Events] button and all programmed events are stored with the file name of “EVENTS.CFG”.
Press the [Config] button and the controller configuration and holidays are saved with the file name of
“CONFIG.CFG”
Import:
Press the [Events] button and the controller looks for the file named “EVENTS.CFG” and reads the events
from it. Note: All current events are deleted before importing.
Press the [Config] button and the controller looks for a file named “CONFIG.CFG” and reads the
configuration and holiday data.
Removing the USB drive will exit this window and return to the main menu window. If you use the red X
button to exit this window be sure to remove your USB drive.