Arthrex Synergy AR-9800, User Manual

Page: 41 / 60

Operation and Frequently Used Functions
Synergy
RF™
User’s Guide
DFU-0221-6r0_fmt_en-US
Page 39 of 58
Figure 8 Information Screen - Operation
Table 14 Information Screen Display - Operation
1. Model, Software Versions & Builds for each controller.
2. Menu button Returns to the menu screen.
3. Home button Returns to the main screen.
5.2.2.1 Arthrex Apollo RF® device (Probe) Limits - IDR
The Arthrex Synergy
RF
generator has built in intelligent device recognition (IDR)
for Arthrex Apollo
RF®
probes. When attached, the recommended setting will be
automatically applied, but individuals that desire an alternate setting can use the
ABLATE power, COAG power, or Ablate power change button (see Figure 13)
on the device to change the settings. Some power settings may be not be
allowed, depending on the RF probe attached
5.2.3 Reset Defaults Screen
The Reset Defaults screen prompts the user to confirm resetting to factory
defaults. This screen is displayed when the Reset Defaults button is pressed on
the
Settings screen.
3
1
2