manualshive.com logo in svg

Arthrex NanoScope, Manual, Page: 30 / 44

Share
Download
Arthrex NanoScope Manual Download Page 30

Cleaning and Disinfecting  

NanoScope Manual 

DFU-0298-1, Revision 0 

Page 26 of 38

 

 

5.0  Cleaning and Disinfecting 

5.1 

NanoScope Console  

The NanoScope Console is provided non-sterile and should not be 

sterilized. The NanoScope Console can be cleaned/disinfected using a 

clean cloth dampened with commercially available surfactants or 

surface disinfectants only. The Console must not be submersed in any liquid.  
Always allow adequate time for flammable solvent used for cleaning and 

disinfecting to evaporate before using. 
Always turn the power off and disconnect the external power adapter before 

cleaning the Console. 

Always comply with the instructions issued by the manufacturer of 

the cleaning disinfectant regarding concentration, exposure times, 

temperature and material compatibility. 

NEVER allow the Console receptacles to have any contact with liquids. 

If there is dust or moisture on the receptacles, remove with dry 

compressed air. ONLYa dry Handpiece connector should be plugged 

into the Console. 

Do NOT clean the device with abrasive cleaning or disinfectant 

compounds, solvents, or other materials that could scratch or damage 

the device. 

Summary of Contents for NanoScope













































Reviews:

No comments