DrillSaw Mini 300™ System
User’s Guide
DFU-0223-2 Rev. 0
Page 34
1
1
1
1
.
.
0
0
Electromagnetic Emissions
Table 19
Guidance and Manufacturer's Declaration - Electromagnetic
Emissions
The DrillSaw Mini 300 System is intended for use in the electromagnetic environment
specified below. The customer or the user of the DrillSaw Mini 300 System should
ensure that it is used in such an environment.
Emissions test
Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The DrillSaw Mini 300 System uses RF energy only
for its internal function. Therefore its RF emissions
are very low and not likely to cause any interference
with nearby electronic equipment.
RF emissions
CISPR 11
Class A
The DrillSaw Mini 300 System is suitable for use in
all establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Complies