ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ELT 1000 (P/N: A3-06-2749-1)
Y1-03-0259 Rev. U
Company Confidential
Page 35 of 62
Figure 11 Battery Pack Removal
2)
Lay the ELT on a surface with the battery side up, to view the embossed text “BATTERY ACCESS ON THIS
SIDE”.
3)
Remove the eight screws from the battery cover.
4)
Lay the ELT on its side, while keeping the ELT and battery pack securely held together.
5)
Carefully separate the battery pack from the ELT, taking care not to put strain on the short flex cable.
6)
Disconnect the flex cable from the small circuit board mounted in the battery pack by carefully opening the flex
cable connector.
7)
Dispose of battery within the rules and guidelines of your regional Waste Disposal Authority.
3.
Material or Equipment Return
A.
Shipment Information
1)
If any material or equipment is to be returned to the factory, under warranty or otherwise, ACR Electronics,
Inc. must be notified prior to shipment with the following information:
a)
Model and serial number of equipment being returned
b)
Date purchased
c)
Date placed in service
d)
Number of hours in service
e)
Nature and cause of failure
f)
Remarks, if any
