Artesyn SharpStreamer Pro PCIE-7210 Installation And Use Manual Download

Page: 97 / 140

Base Operating System

SharpStreamer™ Pro PCIE-7210 Installation and Use (6806800U29B)

-i 192.168.201.2:/7210/release/images

6.2.4.1

Automatic Installation

6.2.4.1.1 Local Disk

If the installation is onto a local disk with the following information.



Disk: sda



Images Location:

/media/usbdrive/images

Usage Command

/opt/bladeservices/tools/flashrfsrc.sh -d disk:sda -i

local:/media/usbdrive/images

6.2.4.1.2 iSCSI disk

If the installation is onto a iSCSI disk, with following information.

Usage Command

/opt/bladeservices/tools/flashrfsrc.sh -d iscsi:iqn.2016-

07.com.artesyn2: initiator@eth0:192.168.201.2:5000:iqn.2016-

07.com.artesyn2:target -i 192.168.201.2:/7210/images

Field Name

Value

TFTP Server

192.162.201.1

Images Location

7210/images

Initiator Name

iscsi:iqn.2016-07.com.artesyn2:initiator

Initiator Interface

eth0

Target IP

192.168.201.2

Target Port

5000

Target Name

iqn.2016-07.com.artesyn2:target

Summary of Contents for SharpStreamer Pro PCIE-7210













































































































































Search results

Summary of Contents for SharpStreamer Pro PCIE-7210

Reviews:

Related manuals for SharpStreamer Pro PCIE-7210

Brands by name

Popular brands

Artesyn SharpStreamer Pro PCIE-7210, Installation And Use Manual

Search results

Summary of Contents for SharpStreamer Pro PCIE-7210

Reviews:

Related manuals for SharpStreamer Pro PCIE-7210

Brands by name

Popular brands