background image

Base Operating System

SharpStreamer™ Pro PCIE-7210 Installation and Use (6806800U29B)

91

6.2.2

Booting via USB drive 

6.2.2.1

Creating a bootable USB on a Linux Machine

Prerequisites

1 GB USB drive

A PC with CentOS7.2 with extlinux, syslinux, sgdisk, and parted installed. 
The installation script will verify these utilities and abort, if not available.

To create a bootable USB on Linux machine:

1. Connect the USB drive.

2. Mount the 

MC3K_7210_OS_CENTOS72_DIST_<Release and Version number>. iso

 

to a 

directory

mkdir -p /mnt

mount MC3K_7210_OS_CENTOS72_DIST_<Release and Version number>. 

iso /mnt

3. Run the 

create_bootusb.sh

 script available in the 

utlis

 directory under mount point 

and then follow on screen instructions.

# cd /mnt/utils

#

 

sh create_bootusb.sh

6.2.2.2

Creating a bootable USB on a Windows Machine

Prerequisites

1 GB USB drive

Windows 7 or later.

To create a bootable USB on a Windows machine:

1. Download the latest version of 

rufus

 from

 https://rufus.akeo.ie/downloads/

 to your 

system.

2. Install 

rufus

.

3. Insert the USB drive.

Summary of Contents for SharpStreamer Pro PCIE-7210













































































































































Reviews: