Artesyn SharpStreamer Pro PCIE-7210 Installation And Use Manual Download

Page: 80 / 140

BIOS

SharpStreamer™ Pro PCIE-7210 Installation and Use (6806800U29B

)

The following table provides information about options in the

Boot Configuration

submenu

and their default values.

5.2.2.2

Console Redirection Setup

The following figure shows the

Console Redirection Setup

submenu screen. The settings are

applied to all ports, if selected. Individual submenus are available, if there is a need for separate
port configuration.

The values shown in the tables enclosed within brackets [...] indicate the default settings.

Table 5-5 Boot Configuration

Feature

Options

Description

Numlock

[On]
Off

Enables or disables Numlock.

Figure 5-6

Console Redirection Setup

Summary of Contents for SharpStreamer Pro PCIE-7210













































































































































Search results

Summary of Contents for SharpStreamer Pro PCIE-7210

Reviews:

Related manuals for SharpStreamer Pro PCIE-7210

Brands by name

Popular brands

Artesyn SharpStreamer Pro PCIE-7210, Installation And Use Manual

Search results

Summary of Contents for SharpStreamer Pro PCIE-7210

Reviews:

Related manuals for SharpStreamer Pro PCIE-7210

Brands by name

Popular brands