Artesyn MVME721X RTM, Installation And Use Manual, Page: 25 / 54

Chapter 2
MVME721X RTM Installation and Use (6806800M42D)
25
Hardware Preparation and Installation
This chapter describes the preparation before installing the RTM, the applicable environmental
and power requirements, and the actual installation and removal of the RTM.
2.1 Unpacking and Inspecting the RTM
Shipment Inspection
To inspect the shipment, perform the following steps:
1.
Verify that you have received all items of your shipment:

MVME721X RTM

One printed copy of Quick Start Guide

One printed copy of Safety Notes Summary

Any other items ordered
Damage of Circuits

Electrostatic discharge and incorrect installation and removal of the blade can damage
circuits or shorten its life.

Before touching the blade or electronic components, make sure that you are working in
an ESD-safe environment.