Artesyn MVME2502, Installation And Use Manual, Page: 150 / 164

Programming Model
MVME2502 Installation and Use (6806800R96D )
150
7.6.4 LBC Timing Parameters
The following table defines the timing parameters for the devices on the local bus.
Table 7-5 LBC Timing Parameters
0 1 2 3 4 5 6
MRAM UART 0 UART 1 UART 2 UART 3 CPLD Timers
BCTLD 0 0 0 0 0 0 0
CSNT 1 1 1 1 1 1 1
ACS 10 10 10 10 10 10 10
XACS 0 0 0 0 0 0 0
SCY 0011 0011 0011 0011 0011 0011 0011
SETA 0 0 0 0 0 0 0
TRLX 0 0 0 0 0 0 0
EHTR 0 0 0 0 0 0 0
EAD 0 0 0 0 0 0 0
Field Description
BCTLD Buffer control disable.
0 - LBCTL is asserted upon access to the current memory bank.
CSNT Chip Select negation time.
1 - LCSn and LWE are negated one quarter of the bus clock cycle earlier
ACS Address to chip-select setup.
10 - LCSn is outputted one quarter bus clock cycle after the address lines.
XACS Extra Address to chip-select setup
0 - Address to chip-select setup is determined by ORx[ACS]
SCY Cycle length in bus clocks
0011 - bus clock cycle wait state