Artesyn MVME2502, Installation And Use Manual, Page: 109 / 164

Chapter 5
MVME2502 Installation and Use (6806800R96D)
109
Memory Maps and Registers
5.1 Overview
The system resources including system control and status registers, external timers, and the
QUART are mapped into 16 MB address range accessible from the MVME2502 local bus
through the P2020 QorIQ LBC.
5.2 Memory Map
The following table shows the physical address map of the MVME2502.
Table 5-1 Physical Address Map
Device Name Start Address End Address Size
DDR 0x0000_0000 0x7fff_ffff 2 GB
PCIE 3 Mem 0x8000_0000 0x9fff_ffff 512 MB
PCIE 2 Mem 0xa000_0000 0xbfff_ffff 512 MB
PCIE 1 Mem 0xc000_0000 0xdfff_ffff 512 MB
PCIE 3 IO 0xffc0_0000 0xffc0_ffff 64 KB
PCIE 2 IO 0xffc1_0000 0xffc1_ffff 64 KB
PCIE 1 IO 0xffc2_0000 0xffc2_ffff 64 KB
UART0 0xffc4_0000 0xffc4_ffff 64 KB
UART1 0xffc5_0000 0xffc5_ffff 64 KB
UART2 0xffc6_0000 0xffc6_ffff 64 KB
UART3 0xffc7_0000 0xffc7_ffff 64 KB
Timer 0xffc8_0000 0xffc8_ffff 64 KB
CPLD 0xffdf_0000 0xffdf_0fff 4 KB
CCSR 0xffe0_0000 0xffef_ffff 1 MB
MRAM 0xfff0_0000 0xfff7_ffff 512 KB