manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 60 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 60

Functional Description

MITX-CORE-820 Installation and Use (6806800M10H)

59

4.7

PCI Express

The MITX-CORE-820 has one x16 5G PCI-Express slot which supports graphics cards up to 75 W 
in power. The position of the PCI-Express slot follows the Mini-ITX Addendum Version 1.1 of the 
microATX Motherboard Interface Specification Version 1.2. 

The Cougar Point-mbl PCH has one x1 PCI-Express port (port 6) to the WG82579LM and one x1 
PCI-Express port (port 3) to the WG82574L. Port 7 will be used for a PCI-Express Mini Card 
connector for WiFi/WiMAX, port 8 is used for DMC card slot.

4.8

LAN on Motherboard

The MITX-CORE-820 provides two GbE ports. One port uses the Intel 6 Series PCH integrated 
MAC and the Intel WG82579LM GbE PHY. The Intel WG82579LM is connected to PCH through 
the 1x PCI-Express. The other Gbe port uses Intel WG82574L controller (MITX-CORE-820 only). 
The design provides two RJ-45 connectors supporting 10/100/1000 Base T. LAN is powered by 
suspend well to support AMT and wake-on-LAN while in S5. WG82579LM uses +V3.3 M and 
WG82574L uses +V3.3 A.

LAN connector has two integrated LEDs.

A single green LED

–

OFF (no light) - LAN link is not established

–

ON (steady light) - LAN link is established

–

Blinking - indicates LAN link activity

18

DP_TXN1

38

SMB_THRM_CLK

19

DP_TXP1

39

SMB_THRM_DATA

20

GND

40

GND

Table 4-5 eDP Connector (J15)  (continued)

Pin#

Signal Name

Pin#

Signal Name

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments