manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 56 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 56

Functional Description

MITX-CORE-820 Installation and Use (6806800M10H)

55

4.4

Chipset

Mobile Intel 6 series PCH is used on the board. The board can support QM67 with Core i3, i5 and 
i7 processors. It can also support the low end version HM65 with Celeron SKU.

4.5

System Memory

The MITX-CORE-820 supports one DDR3 1066MT/s/1333MT/s/1600MT/s SODIMM per 
channel, for a total of 2 DDR3 SODIMMs. Maximum memory capacity is 16 GB (8 GB per 
SODIMM) using 2 GB technology. Minimum capacity is a single 1 GB SODIMM using 1 GB 
technology.

Table 4-1 PCH SKUs  

Feature Set

SKU Name

QM67

UM67

HM67

HM65

QS67

PCI Express 2.0 Ports

8

8

8

8

8

PCI  Interface

No

No

No

No

No

USB 2.0 Ports

14

14

14

12

5

14

Total number of SATA Ports

SATA Ports (6 Gb/s, 3 Gb/s and 1.5 Gb/s

SATA Ports (3 Gb/s and 1.5 Gb/s only)

6
2

4

4

6
2

4

4

6
2

4

4

6
2

4

4

6
2

4

4

HDMI/DVI/VGA/SDVO/Display Port/eDP/LVDS

Yes

Yes

Yes

Yes

Yes

Integrated Graphics Support with PAVP 2.0

Yes

Yes

Yes

Yes

Yes

Intel © Rapid Storage 
Technology

AHCI

Yes

Yes

Yes

Yes

Yes

Raid 0/1/5/10 Support

Yes

No

Yes

No

Yes

Intel © Anti-Theft

Yes

Yes

Yes

Yes

Yes

Intel © AMT 7.0

Yes

No

No

No

Yes

Intel © Remote PC Assist Technology - Proactive

Yes

Yes

Yes

No

Yes

Intel © Remote PC Assist Technology - Reactive

Yes

Yes

Yes

Yes

Yes

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments