manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 46 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 46

Hardware Preparation and Installation

MITX-CORE-820 Installation and Use (6806800M10H)

45

Removing Memory Module

1. Wear the ESD-preventive wrist strap.

2. Release the module from the slot by pushing the spring latches on either side of the module 

outward.

3.

Lift the module from the motherboard.

2.5

Processor Cooler Installation 

Installing the Processor Cooler

1. Wear the ESD-preventive wrist strap.

2. Take the processor cooler and the backplate out of the anti-static package.

3. Prepare the backplate by taking off the protective film to reveal the glue layer. 

4. Align the backplate to the motherboard. The screw holes on backplate should fit exactly 

over the holes on the motherboard. Make sure the glue layer of the backplate does not 
touch any other part of the motherboard.

5. Place the cooler on the backplate and secure it with the provided screws.

6. Plug the fan header into the fan connector on the motherboard.

Damage of the Product and Additional Devices and Modules

Incorrect installation or removal of additional devices or modules damages the product 
or the additional devices or modules.

Before installing or removing additional devices or modules, read the respective 
documentation and use appropriate tools.

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments