Artesyn MITX-CORE-820, Installation And Use Manual, Page: 43 / 133

Hardware Preparation and Installation
MITX-CORE-820 Installation and Use (6806800M10H )
42
2. Check for damage and report any damage or difference to customer service.
3.
Remove the desiccant bag shipped together with the board and dispose of it according to
your country’s legislation.
2.3 Preparing the Installation Environment
Before you install or replace components, pay attention to the following:

Wear an ESD-preventive wrist strap to prevent the static electricity from damaging the
device.

Keep the area where the components reside clean and keep the components away from
heat-generating devices, such as radiator.

Ensure that your sleeves are tightened or rolled up above the elbow. For safety purposes,
it is not recommended to wear jewelry, watch, glasses with metal frame, or clothes with
metal buttons.

Do not exert too much force, or insert or remove the components forcibly. Avoid damage
to the components or plug-ins.

Confirm the feasibility of the of operation
Environmental Damage

Improper disposal of used products may harm the environment.

Always dispose of used products according to your country’s legislation and
manufacturer’s instructions.
This product has been thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, contact customer service immediately.