Artesyn Centellis 2100 Shelf Release 3.0, Installation And Use Manual, Page: 77 / 190

Chapter 3
Centellis 2100 Shelf Release 3.0 Installation and Use (6806800T37D)
77
System Installation
This chapter provides information about pre installation procedure, tools required, installation
and removal of the system, and power up and power down procedures of the system.
3.1 Before Installation
This section provides the following information:

Type label location

Requirements

Tools you will need

Required torque values
3.1.1 Type Label Location
The serial number label for the shelf is located at the system’s right hand side.
3.1.2 Requirements
Please ensure that the requirements outlined in section Requirements on page 69 are met.
To maintain the maximum power rating of the Centellis 2100 AC, the power input cables must
have a minimum cross section of 1 mm
2
.
To maintain the maximum power rating of the Centellis 2100 DC, the power input cables must
have a minimum cross section of 2.5 mm
2
, AWG 12.