Artesyn AXP640, Installation And Use Manual, Page: 82 / 190

Site Preparation
AXP640 Installation and Use (6806800M24F )
82
3.2.3.1 Environmental Requirements
To ensure proper function of the system, make sure that the environment in which the system
is to be used fulfills the environmental requirements.
The environmental values must be tested and proven in the planned system configuration,
that is, the delivered system and other third-party products you want to integrate.
The following table lists the environmental requirements.

Operating temperatures refer to the temperature of the air circulating at the air intake of
the system and not to component temperatures.

Some of the climatic values may exceed the specification of some system components
(for example, hard disks). As Artesyn Embedded Technologies cannot guarantee the
functionality of third party products that are handled or operated out of their
specifications, the environmental conditions may be limited to the specifications of
these components.
Table 3-1 Environmental Conditions
Feature Operating Non-Operating (packed state)
Temperature +5ºC (41°F) to +40ºC (104°F) (normal
operation) according to NEBS standard
GR-63-CORE
-5°C (23°F) to +55°C (131°F) (exceptional
operation) according to NEBS standard
GR-63-CORE -40°C (-40°F) to +70°C (158°F)
Temp. change +/-0.25°C/min
according to NEBS standard GR-63-CORE +/-0.25°C/min
Relative
humidity 5% to 90% non-condensing
according to Artesyn Embedded
Technologies-internal environmental
requirements 5% to 95% non-condensing
according to Artesyn Embedded
Technologies-internal environmental
requirements
Shock Half-sine, 11 ms, 30 m/s
2
Blade level packaging
Half-sine, 6 ms at 180 m/s
2