Artesyn AXP640, Installation And Use Manual

Page: 166 / 190

Shelf Management Alarm Module
AXP640 Installation and Use (6806800M24F )
166

Support for the Command Line Interface (CLI) to access shelf information for:
– Shelf blade population
– List of sensors and sensor values
– Sensor threshold settings
– System events
– Shelf health

Control of chassis cooling management (fan levels)
7.2 Features
The SAM 640 is based on the Pigeon Point Systems ShMM-1500R and Freescale MPC8343
System On a Chip (SOC).
The following lists the features of the SAM.

High density, small (92 mm x 50.8 mm) form-factor

Fully compliant with the Restriction of Hazardous Substances (RoHS) directive

I/O interfaces available on a Tyco 220-pin 0.5 mm Free Height receptacle

128 MB of DDR SDRAM with Error Correcting Code (ECC) support

266 MHz PowerPC superscalar RISC core with MMU and caches (32K/32K with
parity)

64 MB of Flash

Hardware support for a reliable upgrade of software images in Flash

Dual IPMB with IPMB buffer controls for hot insertion and removal onto a live
backplane

Dual serial interface at RS232 or CMOS levels (one port with modem control)

Dual 10/100Mbit Ethernet using the integrated 802.3 controllers buffered by external
onboard
PHY layer devices

FPGA device on the PCI bus used to implement IPMB-0, the Shelf Manager-oriented