Artesyn AXP1440, Installation And Use Manual, Page: 118 / 156

FRU Installation
116 AXP1440 Installation and Use (6806800H23U )
2. Wait until the blue LED is illuminated permanently, then unlatch the upper handle and
rotate both handles fully outward.
NOTE: If the LED continues to blink, a possible reason may be that upper layer software
rejects the blade extraction request.
3. Remove face plate cables, if applicable.
4. Unfasten the screws of face plate until the blade is detached from shelf.
5. Remove the blade from the shelf.
6.2.3 Installing and Removing the Shelf Management Alarm Module
The following sections describe the installation and removal procedures for the shelf
management alarm module (SAM-1500R). For a detailed description of the SAM, refer to
Chapter 7, Shelf Management Alarm Module, on page 127 .
The following figure shows the face plate of the SAM-1500R shelf management alarm module.
Figure 6-1. SAM-1500R
ALARM
CONSLOE
OOS
IS
HS