Artesyn ATCA-7480, Installation And Use Manual, Page: 75 / 330

Controls, Indicators, and Connectors
ATCA-7480 Installation and Use (6806800T17A)
75
The connector residing in zone 1 is called P10 and it carries the following signals:

Power feed for the blade (VM48_x_CON and RTN_x_CON)

Power enable (ENABLE_x)

IPMB bus signals (IPMB0_x_yyy)

Geographic address signals (HAx)

Ground signals (SHELF_GND and GND)

Reserved signals
Zone 2 contains the two connectors P20 and P23. They carry the following types of signals:

Telecom clock signals (CLKx_)

Base interface signals (BASE_)
Figure 3-8 P10 Backplane Connector Pinout