Artesyn ATCA-7480, Installation And Use Manual, Page: 275 / 330

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A)
275
8.4.18 Set Payload Shutdown Time-Out Command
The Set Payload Shutdown Time-Out command is defined in the following table:
8.4.19 Get Module State Command
The Get Module State command is used to query the state of a module (RTM with site ID1)
using any of the external interfaces.
Table 8-46 Set Payload Shutdown Time-Out Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4:5 Time-Out measured in hundreds of milliseconds, LSB first
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00
Table 8-47 Get Module State Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Module Site ID
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00