Artesyn ATCA-7480, Installation And Use Manual, Page: 272 / 330

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A )
272
8.4.14 Reset IPMC Command
The Reset IPMC command allows the payload to reset the IPMC over the KCS host interface.
8.4.15 Hang IPMC Command
The IPMC provides a way to test the watchdog timer support by implementing the Hang IPMC
command, which simulates firmware hanging by entering an endless loop.
Table 8-42 Reset IPMC Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Reset Type Code
0x00: Cold IPMC reset to the Current mode
0x01: Cold IPMC reset to the Normal mode
0x02: Cold IPMC reset to the Standalone mode, for a
description refer to
Table 8-28
0x03: Cold IPMC reset to the Manual Standalone mode, for
a description refer to
Table 8-28
0x04: Reset the IPMC and enter Upgrade mode
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00
Table 8-43 Hang IPMC Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Response Data 1 Completion Code