Artesyn ATCA-7360, Installation And Use Manual

Page: 252 / 288

Supported IPMI Commands
ATCA-7360 Installation and Use (6806800J07S )
252
8.4.16 Graceful Reset Command
The IPMC supports the Graceful Reboot option of the FRU Control command. On receiving
such a command, the IPMC sets the Graceful Reboot Request bit of the IPMC status, sends a
status update notification to the payload, and waits for the Graceful Reset command from the
payload. If the IPMC receives such a command before the payload communication time-out
time, it sends the 0x00 completion code (Success) to the shelf manager. Otherwise the 0xCC
completion code is sent.
The IPMC does not reset the payload on receiving the Graceful Reset command or time-out. If
the IPMC participation is necessary, the payload must request the IPMC to perform a payload
reset. The Graceful Reset command is also used to notify the IPMC about the completion of the
payload shutdown sequence.
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00
Table 8-40 Hang IPMC Command (continued)
Type Byte Data Field
Table 8-41 Graceful Reset Command
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00