Artesyn ATCA-7360, Installation And Use Manual

Page: 241 / 288

Supported IPMI Commands
ATCA-7360 Installation and Use (6806800J07S)
241
8.4.2 Get Serial Interface Properties Command
The Get Serial Interface Properties command is used to get the properties of a particular serial
interface.
8 Bits [4:7] Reserved
Bits [0:3] Clock Bus 3 Events
These bits indicate pending Clock Bus 3 requests arrived from
the shelf manager:
0: Clock Bus 3 Query
1: Clock Bus 3 Release
2: Clock Bus 3 Force
3: Clock Bus 3 Free
Table 8-26 Get Status Command (continued)
Type Byte Data Field
Table 8-27 Get Serial Interface Properties Command
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Interface ID
0: Serial Debug Interface
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00