Artesyn ATCA-7360, Installation And Use Manual

Page: 232 / 288

Supported IPMI Commands
ATCA-7360 Installation and Use (6806800J07S )
232
8.2 PICMG 3.0 Commands
The Artesyn IPMC is a fully compliant AdvancedTCA intelligent Platform Management
Controller i.e. it supports all required and mandatory AdvancedTCA commands as defined in
the PICMG 3.0 and AMC.0 R2.0 specifications.
Table 8-18 Supported PICMG 3.0 Commands
Command
NetFn
(Request/Response)
CMD Comments
Get PICMG Properties 0x2C/0x2D 0x00 -
Get Address Info 0x2C/0x2D 0x01 -
FRU Control 0x2C/0x2D 0x04 The blade supports the
cold reset and graceful
reboot options.
Get FRU LED Properties 0x2C/0x2D 0x05 -
Get FRU LED Color Capabilities 0x2C/0x2D 0x06 -
Set FRU LED State 0x2C/0x2D 0x07 -
Get FRU LED State 0x2C/0x2D 0x08 -
Set IPMB State 0x2C/0x2D 0x09 -
Set FRU Activation Policy 0x2C/0x2D 0x0A -
Get FRU Activation Policy 0x2C/0x2D 0x0B -
Set FRU Activation 0x2C/0x2D 0x0C -
Get Device Locator Record ID 0x2C/0x2D 0x0D The Artesyn IPMCs support
the standard PICMG 3.0
and the extended AMC.0
R2.0 versions of this
command.
Set Port State 0x2C/0x2D 0x0E -
Get Port State 0x2C/0x2D 0x0F -
Compute Power Properties 0x2C/0x2D 0x10 -
Set Power Level 0x2C/0x2D 0x11 -
Get Power Level 0x2C/0x2D 0x12 -
Get IPMB Link Info 0x2C/0x2D 0x18 -