Artesyn 6806800U73A, Installation And User

Page: 49 / 54

Appendix A
PCIE-6001 Installation and Use (6806800U73A)
49
PCIE-6001 Card Configuration Example
A.1 Configuration Example
This section provides information required to configure M.2 AHCI or NVME SSDs on a PCIE-
6001 card to the CPUs on the host PCIE cards in the Artesyn MaxCore system.
A.1.1 Artesyn MaxCore System
The System Services Framework (SSF) management system provides the MaxCore operator
console, which enables you to connect each M.2 AHCI/NVME SSD on a PCIE-6001 card to any
CPU on a SharpServer PCIE-7410 card or on a SharpStreamerPro PCIE-7210 card in the same
MaxCore system.
The PCIE-6001 card with M.2 AHCI or NVME SSD modules are displayed in the CPUs PCIe device
tree after booting the CPUs, along with many other PCIe devices that were connected to a CPU
by SSF. These M.2 AHCI or NVME SSD modules can be mounted at run time and can also be
used as a boot device. All four module slots are accessible in an 8-lane MaxCore slot. The size
and location of 8-lane slots differ depending on the MaxCore platform being used.
For more information on how to assign individual M.2 AHCI or NVME SSD modules to
application CPUs within a MaxCore system, refer to
SSF for MaxCore MC3000 Platform GUI Help .