Artesyn Embedded Technology SharpStreamer PCIE-7207 Installation And Use Manual Download Page 43

Page: 43 / 118

Functional Description

SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F)

The following figure shows the location of the MicroSD cards and the corresponding MCPs on
the board.

3.7.1

MicroSD as Firmware Recovery option

The MicroSD can be used as a BIOS recovery option. You can format the MicroSD card as fat32,
then copy the recovery firmware onto the card. Boot the server with a Linux CentOS Operating
System and run the

pci7207

command to recover the firmware. The process to write the

recovery BIOS into the firmware over the MicroSD bus takes about 10 minutes.

Figure 3-3

MicroSD Card and MCP Location

MicroSD

MCP2

MicroSD

MCP4

MCP1

MCP2

MCP4

MCP3

MicroSD

MCP3

MicroSD

MCP1

Primary Side

Secondary Side

Summary of Contents for SharpStreamer PCIE-7207























































































































Search results

Summary of Contents for SharpStreamer PCIE-7207

Reviews:

Related manuals for SharpStreamer PCIE-7207

Brands by name

Popular brands

Artesyn Embedded Technology SharpStreamer PCIE-7207, Installation And Use Manual

Search results

Summary of Contents for SharpStreamer PCIE-7207

Reviews:

Related manuals for SharpStreamer PCIE-7207

Brands by name

Popular brands