Board Exchange
Centellis 2000 User Card 10GE with Telco Alarm Installation and Use (6806800M46C
)
52
The board provides two independent power inputs according to the AdvancedTCA
specification. Each input has to be equipped with an additional fuse of maximum 30 A located
either in the shelf where the board is installed or the power entry module (PEM).
4.2.1.3
Required Equipment
Gather the following equipment before starting the installation:
Screwdriver
ESD wrist strap
4.2.2
Unpacking and Inspecting the Board
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
Printed Safety Notes
Centellis 2000 User Card 10GE with Telco Alarm
Any optional items ordered
Board Damage
Touching the board or electronic components in a non-ESD protected environment causes
component and board damage.
Before touching boards or electronic components, make sure that you are working in an
ESD-safe environment or wear ESD wrist straps.
