Artesyn Embedded Technology Centellis 2000 Series, Installation And Use Manual

Page: 46 / 60

Controls, Indicators and Connectors
Centellis 2000 User Card 10GE with Telco Alarm Installation and Use (6806800M46C )
46
3.2 Sensors
The IPMC functionality is based on the IPMI specification V1.5.
The IPMI sensors on the Centellis 2000 User Card 10GE with Telco Alarm are shown in Table 3-3 .
For further information, refer Centellis 2000 User Card 10 GE with Telco Alarm: Control via IPMI
Programmer’s Reference.
Table 3-3 Centellis 2000 User Card 10GE with Telco Alarm Specific Sensors
Sensor Name
Sensor Type Code
Description Generate
Event Event/ Reading Type
Code
HotSwap HotSwap (F0h) Hot swap sensor Yes Sensor specific (6Fh)
Ejector_State Button (14h) Ejector state
sensor - Sensor specific (6Fh)
IPMC_State OEM (D5h) IPMC state OEM
sensor - Sensor specific (6Fh)
IPMB0_State IPMB (F1h) IPMB0 state
sensor - Sensor specific (6Fh)
SFP_Enable Other FRU (1Ah) Enable/Disable
SFP Writable OEM
sensor No Type enable (9)
SFP_TXDIS Other FRU (1Ah) SFP TXDIS signal Yes Reading type failure (4)
SFP_LOS Other FRU (1Ah) Loss of signal
indication Yes Reading type failure (4)
SFP_TXFAULT Other FRU (1Ah) SFP transmit fault Yes Reading type failure (4)
SFP_PRESENT Other FRU (1Ah) SFP presence
sensor Yes Presence (8)
PMD_LOSS_SIGNAL Monitor IC (26h) Loss of signal
indication
Yes Reading type failure (4)
PMD_CMU_LOCK Monitor IC (26h) PMD CMU Lock
detect Yes Reading type failure (4)
PMD_LinkAlarm Monitor IC (26h) Loss of signal
indication Yes Reading Type failure (4)
PMD_CDR_LOCK Monitor IC (26h) PMD CDR Lock
detect Yes Reading type failure (4)