Introduction
Centellis 2000 User Card 10GE with Telco Alarm Installation and Use (6806800M46C
)
24
Each 10G User Card is connected through the chassis backplane to fabric channel 2 of one front
board via 4x bidirectional Low Voltage Differential Signal (LVDS) signals. The LVDS signals
provide the XAUI 10G Ethernet interface which is converted by the 10G User Card to a serial
10G Ethernet interface on an SFP+ module.
Figure 1-1
Functional Block Diagram of the Centellis 2000 Chassis
