Artesyn Embedded Technology ATCA-7490, Installation And Use Manual

Page: 292 / 372

Supported IPMI Commands
ATCA-7490 Installation and Use (6806800U11F )
292
8.4.2 Reset IPMC Command
The Reset IPMC command allows the payload to reset the IPMC over the KCS host interface.
7 Bits [4:7] Clock Bus 2 Events
These bits indicate pending Clock Bus 2 requests arrived from
the shelf manager
0: Clock Bus 2 Query
1: Clock Bus 2 Release
2: Clock Bus 2 Force
3: Clock Bus 2 Free
Bits [0:3] Clock Bus 1 Events
These bits indicate pending Clock Bus 1 requests arrived from
the shelf manager:
0: Clock Bus 1 Query
1: Clock Bus 1 Release
2: Clock Bus 1 Force
3: Clock Bus 1 Free
8 Bits [4:7] Reserved
Bits [0:3] Clock Bus 3 Events
These bits indicate pending Clock Bus 3 requests arrived from
the shelf manager
0: Clock Bus 3 Query
1: Clock Bus 3 Release
2: Clock Bus 3 Force
3: Clock Bus 3 Free
Table 8-29 Get Status Command Description (continued)
Type Byte Data Field
Table 8-30 Reset IPMC Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00