11
Ordercode: A9915060/A9915061
Domotion DLC-4 RGB
6.
Scene
With this menu you can save a scene, playback a scene or lock/unlock recording a scene.
6.1
Save scene
01)
Press the P- or S-button for 1 second to activate the automatic mode.
02)
The button clicks and will light up.
03)
Scroll through the circular touchpad to choose the desired program or adjust the speed.
04)
Press one of the figure buttons (1-4) for 2 seconds to store the scene.
05)
All buttons will flash once to confirm the desired scene.
06)
The desired scene is now stored including the preset built-in program, speed and brightness.
07)
The device can store up to 4 scenes.
6.2
Playback scene
01)
Press the P- or S-button for 1 second to activate the automatic mode.
02)
The button clicks and will light up.
03)
Press one of the figure buttons (1-4) to recall the desired scene.
04)
The button will light up and the choosen scene will be played.
6.3
Lock/unlock
01)
Press the P- and S-button simultaneously for 10 seconds.
02)
The S-button is now locked, it is not possible to record a scene.
03)
It remains possible to recall a scene with the figure buttons (1-4).
04)
To unlock the S-button, press the P- and S-button simultaneously for 10 seconds.
05)
All buttons will flash once.
06)
The S-button is now unlocked, it is possible to record a scene again.
7.
Button click
With this function you can turn on or turn off the button click.
01)
To turn ON or turn OFF the button click, press all figure buttons (1-4) simultaneously.
02)
All buttons flash simultaneously to confirm the setting.
03)
If you choose to turn ON the button click, the click will disappear when you reach the minimum or
maximum value by turning the circular touchpad.
04)
If you choose to turn OFF the button click, all buttons will flash 3 times when you reach the minimum
or maximum value by turning the circular touchpad.
8.
Default settings
With this function you can reset the device to its default settings.
01)
Press and hold down the P and B –button simultaneously for 10 seconds.
02)
All buttons flash simultaneously to confirm resetting the device to its default settings.
03)
All user settings will be deleted.
04)
The fadetime for the color change and power on/off is now 2 seconds.
05)
The recorded scenes will be deleted and replaced by default scenes.
9.
Multiple devices
With this function you can connect multiple devices with each other.
01)
Connect multiple devices with the Link IN/OUT terminals at the back of the device.
02)
It is possible to connect up to 32 devices with each other.
03)
You can send data from the current device to the other connected devices by pressing the P-, C-, B-
and S-button simultaneously for 5 seconds.
04)
All buttons flash simultaneously and the current device is ready to send the data.
05)
Press the S-button to start sending the data to the connected devices.
06)
During the sending the P-, C-, B- and S-button will light up in sequence.
07)
It will take 10 seconds until the data is completely send to the other devices.
08)
After the sending is done, all devices will return to the normal mode.
Summary of Contents for Domotion DLC-4 RGB
Page 16: ... 2017 Artecta ...
