03.26.15 | Rv3 | CC2105
INSTALLATION INSTRUCTIONS
Tops and Legs ship in separate cartons
1.
Place the work surface upside down on a cardboard or carpeted surface to prevent finish from scratching.
2.
Place the triangular Leg Plate on the top and slide beneath the Quick-Set Bracket in the direction shown in
Figure 1.
NOTE:
A plastic or rubber mallet may be used to lightly tap the leg beneath the Quick-Set Bracket. In the
event that the triangular Leg Plate does not slide underneath the Quick-Set Bracket with light tapping
of the mallet, the screws identified “A” in Figure 1 below may be slightly loosened and then
retightened to enable the triangular Leg plate to slide beneath the Quick-Set Bracket.
Activity Tables
Figure 1
Use mallet here to lightly tap leg
plate beneath Quick-Set Bracket
Slide leg plate in this direction
Quick-Set Bracket
Leg Plate
“A” - (5 places)
