8-1
FlexiBowl - models 350 - 500 - 650 - 800
CHAPTER 8 - Decommissioning and disposal
8.
DECommissioning AnD DisPosAl
CAUTion!
Decommissioning and dismantling operations must be assigned to staff specialised in such activities.
Namely, only the person in charge of dismantling and disposal at the end of the service life can:
•
disconnect the parts mechanically and electrically following the disassembly instructions and
blueprints.
•
transport the parts from the system site to the disposal centre for sorting the parts.
The machine mainly consists of the following materials:
• painted, plasticised or galvanised ferritic steel;
• 300/400 series stainless steel;
• plastic polyethylene material;
• elastomers, PTFE, graphite;
• gear oil;
• lubricating grease;
• electric motors;
• power cables with relative sheaths;
• electronic control and actuation devices.
• etc.
CAUTion!
The machine does not contain any components or hazardous substances that require special removal
procedures.
8.1
Decommissioning
If the machine
will not be used for a long time
, it must be made safe and stored properly. Proceed as described:
step
Action
1
Disconnect the power.
2
Disconnect the air supply.
3
Protect electrical equipment that is particularly prone to wear over time and dust.
imPoRTAnT!
When decommissioning machines from external suppliers, see the sub-supplier manuals for said machines
attached hereto.
Summary of Contents for FlexiBowl 350
Page 6: ...0 6 Instructions for use and warnings TABLE OF CONTENTS PAGE INTENTIONALLY LEFT BLANK...
Page 24: ...3 6 Instructions for use and warnings CHAPTER 3 Safety measures PAGE INTENTIONALLY LEFT BLANK...
Page 82: ...9 2 Instructions for use and warnings CHAPTER 9 Attachments PAGE INTENTIONALLY LEFT BLANK...
