HOW TO LOAD STAPLES AND NAILS
3
LOADING STAPLES AND NAILS:
Hold staple gun upside down. Release magazine latch by
pushing up and pulling open as shown in
fig 1
.
Pull magazine open as shown in
fig 2
.
TO LOAD STAPLES
… Insert strip of staples into magazine as
shown in
fig 3
.
TO LOAD NAILS
… Insert strip of nails into magazine against
side of channel with staple viewing window as shown in
fig 4
.
Push magazine closed. With thumb push on magazine door
making sure magazine latch locks into place
fig 5
.
IMPORTANT Gun must NOT be loaded with staples and
nails at the same time.
STAPLE VIEWING WINDOW
When staples are in middle of window there are approximately
15 staples still in the magazine
fig 6
.
Fig1.
Fig5.
Fig3.
Fig4.
Fig6.
Fig2.